Litter-Robot™ EVO Full Setup Bundle

Over 95% of cats acclimate to Litter-Robot*, and most begin using it within a few days to a week. (*Based on stated reasons for customer returns of Litter-Robot 4 and 3 over a one-year period). It's natural for some cats to be initially uncertain or wary of new objects in their territory. Litter-Robot EVO is designed to be as cat-friendly as possible, featuring QuietSift® technology that minimizes noise during the cleaning cycle. The cleaning cycle won’t begin until minutes after your cat has exited the automatic litter box, and you can extend the delay up to 30 minutes for skittish cats.

To ease the transition, place Litter-Robot where the old litter box was and, for a short time, keep both nearby. Mixing a cup of used litter into the clean litter in the Litter-Robot helps provide a familiar scent. You can also leave Litter-Robot turned off until your cat has tried it. With these steps—and a little patience—most cats adapt quickly, especially if they’re already used to a covered litter box. Learn more about acclimating your cat.

Litter-Robot EVO is suitable for cats that weigh 1.4–8.6 kg, including large breeds like Maine Coons. With an entryway width of 37.7 cm and an interior height of 36.8 cm, most domestic cats can fit comfortably inside the globe. If you have an especially large or tall cat, consider Litter-Robot 5 or Litter-Robot 4.

Yes. Kittens that weigh at least 1.4 kg can safely use Litter-Robot EVO in automatic mode. The unit relies on weight sensors to detect when your cat enters and exits the globe, which then triggers the countdown timer and cleaning cycle.

For kittens under 1.4 kg, we recommend using your Litter-Robot EVO in "semi-automatic" mode to keep your kitten safe and relieve you from litter box scooping. For "semi-automatic" mode, leave Litter-Robot powered off or unplugged. When you see your kitten has used it, wait about 7 minutes for the waste to clump, then power it on. Litter-Robot will automatically perform a clean cycle. Afterward, power it off again. Continue this supervised, semi-automatic mode until your kittens have reached 1.4 kg to activate the SmartScale®.

Litter-Robot EVO is a more compact, streamlined version of Litter-Robot 4. It’s ideal for households with one to two cats and offered at a lower price point. Litter-Robot 4 is suitable for up to four cats, offers more advanced features such as litter- and waste-level sensing, and can be equipped with premium accessories like LitterHopper.

Because waste is promptly removed and contained in the base, typical litter box odours will be significantly reduced with Litter-Robot. Litter-Robot EVO features a sealed waste drawer and Carbon Filter to reduce odours. You can opt to combine the Carbon Filter with OdorTrap Packs to eliminate litter box odours through natural chemistry. We also recommend using an unscented, all-natural litter to help with odour control.

With Litter-Robot EVO, you’ll have access to a 7-day look at your cats’ visits and individual cat weights.

Replace the Waste Drawer Liner whenever you need to empty the waste drawer. How often you empty the waste drawer depends on the number and size of your cats. You may only need to empty the Litter-Robot EVO waste drawer as low as once every 7 days. For optimal odour absorption, we recommend replacing the Carbon Filter and OdorTrap® Packs every 2-4 weeks, but replacement frequency is up to you and your cats' usage patterns.

The best litter for Litter-Robot is clumping clay litter. We recommend a high-quality, standard-weight, clay-based clumping litter. Some silica gel litter beads and crystals can also be used with Litter-Robot, as long as they pass through the screen. However, translucent or white-coloured litter (most often seen in crystal litter) may impact the litter level and Drawer Full Indicator (DFI) accuracy in Litter-Robot EVO and are therefore not recommended. Alternative, plant-based litters typically do not work with Litter-Robot as these may not be filtered properly through the sifting system. Litters that do not work in Litter-Robot are the strictly absorbent, non-clumping or loose-clumping litters, newspaper-based litters, and absorbent wood pellet litter.

Yes, Litter-Robot EVO can be used on any type of flooring.

Visit our Getting Started page to view our online setup guide (including tips to acclimate your cat), the user manual, and accessory installation guides.

Litter-Robot EVO requires a 2.4 GHz WiFi signal and IPv4 or IPv6 addressing (5 GHz band not supported). Learn more about onboarding and connecting your Litter-Robot.

Buy with confidence knowing that your investment is backed by our 90-day in-home trial. If you or your pet are not satisfied with your robot appliance, simply return it for a refund of the purchase price. You only have to pay return shipping. If you have purchased your robot appliance through a source other than Litter-Robot.com, you must coordinate the return with that source and according to their product return policy. Visit our Returns page for more information.

WhiskerCare is a comprehensive protection plan that covers your Litter-Robot from top to bottom for 1 year at no cost. A 3-year extended plan is included with most bundles, or you can purchase an extended plan. Our hassle-free plan covers accidental damage, power surges, mechanical and electrical breakdowns, and software support. You’ll have access to our dedicated customer experience specialists, software experts, and US-based service and repair team. During your warranty period, we will resolve robot issues at no charge, including free shipping both ways. There are never deductibles or hidden fees.

Litter-Robot ships from our assembly and fulfillment center located in Juneau, Wisconsin, USA.

We offer free shipping on all orders of CA$75 or more. (Excludes Northwest Territories, Nunavut, and Yukon.) A CA$20 shipping fee is applied to orders below CA$75.