Litter-Robot 4: Step Installation Guide

The Step replaces the handle on the Waste Drawer. Most cats can enter Litter-Robot 4 without issue. The Step provides increased ease of entry. Step mat is included.

The Step is typically included with your purchase.

To Install

  1. Remove the waste drawer and the waste drawer liner.
  2. Turn the waste drawer over to view the bottom of the waste drawer.
  3. Use a Phillips screwdriver to remove the ( 4) screws holding the handle in place. 
  4. Remove the handle.
  5. Position the step on the drawer and align the holes.
  6. Reinstall the (2) rear screws to secure the step.
  7. Install the (2) front screws in the outer holes labeled Step. 
  8. Replace the waste drawer liner and slide the waste drawer closed. Press the Reset button to zero the weight sensors.

Download PDF (English/Deutsch/Français/Italiano)

Questions? Visit whiskersupport.com

Didn't find what you're looking for?

Phone and Chat support available Mon-Fri: 9AM-7PM EST and Sat: 9AM-5PM EST, or submit a ticket anytime.